How To Install a Security Kit

Security kits can be a little tricky to install but don’t worry, we broke it down into two parts and created a detailed step-by-step guide to make it easier for you. 

Part 1: Installing the security wall brackets

1. Attach the mounting plates to the back of the frame.

• For wood frames, two plates should be on top and one plate at the bottom.

• Position the top plates at least ½” from the edges so they will stay unseen.

• Make sure that the bottom plate is centered.

• For metal frames, you’ll only need one mounting plate at the bottom for the T-head screw.

2. Mark the wall

• Align the mounting plates to where the brackets should be on the wall and mark the position.

3. Install the wall brackets

• Drill holes first and then insert the plastic anchors.

• Tighten the screws using a screwdriver.

4. Slide the frame down on the wall until the mounting plates sit on the brackets 5. Before installing a security screw in the wall, check frame level and location

Part 2: Installing the T-screw

1. Mark the spot on the wall for the T-Head Screw

• Align the mark with the bottom mounting plate.

• PRO TIP: Use the T-Head screw as a marker by holding it in the plate and touching the wall.

2. Install the T-Head Security Screw

• The flat neck of the security screw should stick out about 3/8” from the wall in horizontal (unlocked) position.

3. Hang the frame

• The T-Head screw should pass through the bottom mounting plate.

• The frame should evenly stand off the wall about 3/8”.

4. Lock the frame using the Security Wrench

• ⚒️ PRO TIP: You can also place the wrench on the screw neck before you tilt the frame onto the screw to easily locate it.

• To check if the screw is engaged, gently tug the frame to make sure it’s locked in place. 

This can be a bit tricky to line everything up the first time, so give yourself a big pat on the back when you finish!